- -15%
COOL FLOW FAN HARLEY DAVIDSON
Option 1: Fits '17-later FLHR, FLHRC, FLHP, and FLRT models. Does not fit with Starter End Cover P/N 31400088 and 31400090. FLHRC Brazil configurations and FLHP (all regions) require separate purchase of Mid-Frame Air Deflector P/N 57200151. Separate purchase of Mid-Frame Air Deflector Kit P/N 57200157 is recommended for maximum performance on all other vehicles. Dealer Digital Technician update is required.
Option 3: Fits '17-later FLHTCU, FLHTK, FLHTKL, FLHTKSE, FLHTP, FLTRU, and FLHTCUTG models. Does not fit with Starter End Cover P/N 31400088 and 31400090. FLHTCUTG (HDI, ENG, JAP configurations only), FLHTP and FLTRU models require separate purchase of Switch Pack P/N 69200173 and Switch Buttons (2) P/N 71400031. Includes replacement right side Mid-Frame Air Deflector. Dealer Digital Technician update is required.
Keep your cool on a sweltering summer day. Engineered to maximize rider and passenger comfortin high temperature situations, the CoolFlow Fan is the perfect addition if your bike is subjected to parade duty, rush hour traffic, or extreme temperature environments. Unlike traditional fan kits that try to cool the engine by blowing air across the cylinders and often onto your legs, the CoolFlow Fan keeps the riders comfortable by drawing the heated air away from the rear cylinder and exhaust pipe, and directing it toward the ground. This wind-tunnel engineered solution is hidden underneath the seat, and significantly drops the temperature the seated rider experiences. The CoolFlow Fan features switched On/Off/Auto operation. In the “ON” mode, the fan is active at low speeds, and will turn off when the bike reaches 40mph. As speed lowers, the fan turns back on at 35mph. This gap is intentional to prevent the fan from cycling onand off during low speed changes. In the “AUTO” setting, the fan operates based on a combination of slow vehicle speed and specific engine and ambient temperatures. Built to withstand the harsh motorcycle environment, the all-weather CoolFlow Fan is 100% waterproof and includes everything you need for installation. The plug-and-play design is integrated with the vehicle electronics, so fan operation is indicated in the odometer. Your dealer will need to enable the fan in the Electronic Control Module (ECM) and you’re ready to roll.
Option 3: Fits '17-later FLHTCU, FLHTK, FLHTKL, FLHTKSE, FLHTP, FLTRU, and FLHTCUTG models. Does not fit with Starter End Cover P/N 31400088 and 31400090. FLHTCUTG (HDI, ENG, JAP configurations only), FLHTP and FLTRU models require separate purchase of Switch Pack P/N 69200173 and Switch Buttons (2) P/N 71400031. Includes replacement right side Mid-Frame Air Deflector. Dealer Digital Technician update is required.
You might also like